Overriding ( bypass) the plug-in interlock circuit

[kimi E]

Thanks Mickey.
I will do that
Thanks for the link

 

[Gary12345]

I suspect the laws of physics may rule out what you are trying to achieve...

 

[kimi E]

Thanks guys for your feedback. Greatly appreciated.
Innovation generally comes from pushing the boundaries of existing laws.
I will like your input.
All I need is how to get my concept power/ voltage output into the energy system of the car.
Think about it.
When the concept was tested with vehicle in static position, it was able to provide enough charge via the charge cable. The limiting factor remains, the car will not go into ready mode with the charger cable plug, plugged in. Reason why I am seeking advice, how to go around this.

 

[MickeyS70]

Innovation generally comes from pushing the boundaries of existing laws.

As already mentioned, you can push boundaries all you want, but the First Law of Thermodynamics won’t budge: energy cannot be created or destroyed; it can only be converted from one form to another.

If your invention isn’t using kinetic energy, where is the power coming from?

When the concept was tested with vehicle in static position, it was able to provide enough charge via the charge cable.

The charge indicator light on the dash is just confirmation that the cable is plugged in, not that the car is actually charging.

Therefore how long did it take to add 1 bar on the fuel gauge when you tested your concept in standstill?

 

[kimi E]

After noting the communication pin is responsible for alerting the car, the plug is connected and thereby initiating and turning on the OBC to begin charging, ( car can't therefore go into ready state when you turn on key)I cut off the charging cable communicating sensor cable.

The charge cable light now indicates full charge ( solid green) when connected ( not flashing green indicating charging, in which case the car can go into ready state even when plugged in, but w/o any evidence of changing ( include no battery bars)

Thanks for your reply

 

[kimi E]

In regards to my source of energy and the laws of energy conservation, similarly to the Regen breaking or even the fact that some ICE cars are more efficient in fuel management than others, the energy of the concept comes from energy which should have been lost anyways, I just thought of a way to recapture some of it. Yes this is possible

You could be a valuable partner in the project

 

[MickeyS70]

I cut off the charging cable communicating sensor cable.

Which one, there are two?

but w/o any evidence of changing ( include no battery bars)

No surprise there, the OBC/EV-ECU need to be able to ‘talk’ to the EVSE via the communication lines.

, I just thought of a way to recapture some of it. Yes this is possible

No doubt, there are ways to improve efficiency, but when the effort is greater than the yield, it becomes pointless