I finally just got the VCI cable visible in psa-diag.fr VM version 9.91r3!
I'm finally seeing it show up as Actia USB Devices > USB Com Board Evolution Driver (UMDF) in device manger! Yes!
And the PSA Interface checker V3 also sees it now as INIT OK and version APPLI_XS_Fuji_P106138A V4.4.0 @ ACTIA 17.09.20
Reference serial is 921815 C/
Edit: I also got the VCI detected in the psa-diag.fr VM version 7.57 as well now too!
I'm not at home to plug it into the car right now though but will when I get home. Fingers crossed it works!
But one problem is diagbox is asking for a 17 character VIN. My car has a Japanese chassis number which is much shorter. So I'm not sure it will work.
Has anyone shared their VIN on here that I could try to type it in if it doesn't auto find my car and talk to it?
About XP & Win 7 32 bit OS installs:
I'd also like to still figure out how to get a 7.57 or 7.58 install to work on XP or Win 7 32bit so I can do it myself in case it works better for my car. Any idea on the drivers required to get past the unknown device on those OSs?
Based on the driver name in the Vmware 9.91r3 VM, I'm going to try this driver in XP and Win 7 32 bit next to see if it helps.
https://www.driverscape.com/download/usb-com-board-evolution-driver-(-multi-instance-)
Also, in the virtualbox 7.57 VM it shows this driver:
https://www.driverscape.com/download/usb-com-board-evolution-driver-(-multi-instance-)
So far I have not been able to successfully install any version of the software directly on Win 7 32 or 64 bit or Win 10.
I tried last night on XP but the Diagbox 7.01 installation also fails because it is not registered after entering scary01. This was a fresh install of XP on an old HP E5430 laptop.
It simply says: "Activation failed (error o)". Or sometimes that there is no internet connection. But all read me files says not to connect it to the internet.
I'm on my 7th try at least with different OS and VM versions and still no luck.
I must be missing a step or not finding the right drivers to install.