Great work on getting the repair done, nice soldering job.
Is this in a 2010 model? Interesting that it used the same hybrid board.
Is this in a 2010 model? Interesting that it used the same hybrid board.
HiSorry I've not been around much, life has been a bit complicated lately. Since I've done this repair my car has done nearly 2,500 miles. So far so good.
I've got a new batch of the AD202KN pcbs. They are £5 each including UK postage, £6 to the EU and £7 to anywhere else. If you require one message me with your address and email address and I will send you a PayPal invoice.
You will need to source the AD202KN, I got mine from Mouser but at the moment they are showing no stock until mid March. Octopart may help you find one. Avoid purchasing these from Chinese/Ebay suppliers as those don't seem to work properly.
Oh niceTenth digit of VIN represents date:
C = 2012
I have already done the P!A15 resistor bodge in the MCU. Interestingly, I managed that without removing from the vehicle. Just needed to unbolt from the frame, and lift & twist the box, to get access to the bottom plate.
Enter your email address to join: