Main Traction Battery Upgrade i-MiEV

[MickeyS70]

Hello,
Where did you order your batteries
Thank you

See post #212

 

[mradtke]

See post #212

I ordered these cells:

https://www.alibaba.com/product-det...8.html?spm=a2700.wholesale.0.0.256e30b1jevR7c

I searched on alibaba.com today for cells with similar specifications, and found that there are other vendors selling these cells at about the same price, not "significantly higher."

Mike

 

[MickeyS70]

To keep this thread focused on NMC conversions, I have moved discussions regarding LFP cells to

https://myimiev.com/threads/the-aftermarket-cell-replacement-saga.4403/

 

[mradtke]

Hello,

Please note that piev is the organizer of the traction battery upgrade effort and has consulted with many folks to get to this point. My son and I are now benefiting from piev's efforts. Our car's upgrade is performing as expected and we are very pleased.

My son is working on some documentation on "Pack Removal, Module Rebuild, and Man in the Middle." The first version of "Module Rebuild" is complete and may be found at:

https://5by9.net/prune_batteries/moThe first version of "Module Rebuild" is complete and may be found at:dule_rebuild.html

I will post notice of the other sections when they are available.

Our thanks to piev and all the other people who have contributed.

Mike

Hello,

My son has completed the "Pack Removal" section of the documentation.



https://5by9.net/prune_batteries/module_rebuild.html

Hello,

Please note that piev is the organizer of the traction battery upgrade effort and has consulted with many folks to get to this point. My son and I are now benefiting from piev's efforts. Our car's upgrade is performing as expected and we are very pleased.

My son is working on some documentation on "Pack Removal, Module Rebuild, and Man in the Middle." The first version of "Module Rebuild" is complete and may be found at:

https://5by9.net/prune_batteries/module_rebuild.html

I will post notice of the other sections when they are available.

Our thanks to piev and all the other people who have contributed.

Mike

Hello,

My son has completed the "Pack Removal" section of the documentation. It may be found at:

https://5by9.net/prune_batteries/pack_removal.html

Thanks,
Michael

 

[Jiminy]

Hi Michael,

Nice write up! Thanks to you and your son for making this.

Would it be possible to PM me measurements of the jumper tab below by marking it up in MS Paint so that I can have it quoted at Send Cut Send? I've made ballpark guesses below. I will change the numbers and repost when I get the measurements. Also, what is the thickness of the jumper?