piev
Well-known member
- Joined
- Jun 12, 2018
- Messages
- 91
Remove PIN 6 & 7 from BMU
Connect CAN0 of DUE to BMU
Terminate 120ohms
BMU CAN_H |--6-----------------| CAN0_H DUE CAN1_H |-----------ECU
BMU CAN_L --7-----------------|CAN0_L DUE CAN1_L |----------ECU
Connect wires that go to ECU that were in BMU to Due CAN1 No terminator necessary i.e. Pins 6 & 7
I would measure resistance into BMU and to ECU to make sure they are 120 ohms
Connect CAN0 of DUE to BMU
Terminate 120ohms
BMU CAN_H |--6-----------------| CAN0_H DUE CAN1_H |-----------ECU
BMU CAN_L --7-----------------|CAN0_L DUE CAN1_L |----------ECU
Connect wires that go to ECU that were in BMU to Due CAN1 No terminator necessary i.e. Pins 6 & 7
I would measure resistance into BMU and to ECU to make sure they are 120 ohms
Last edited: