LEV50 Cell and Battery Pack Drawings

[Jiminy]

Hello all,

I have been looking into doing a cell swap for a friend who has a 2014 with a potential flagging cell. In my research I have struggled to find good dimension data to base my potential project on. SO, I started this thread to collect good dimensions for the battery pack components. If you have any drawings or dimensions to add to this thread then by all means add them.

For those who want dimensions for the LEV50 cell this is the best information I have thus far thanks to MickeyS70. We now have a pretty good model. You can access the .stl or .step files down near my name below. If you want to print this with your fdm printer, the top and bottom are printed separately to save both filament and time. I designed it to allow you to screw in two M8-1.25 x 15 hex cap screws into the bottom of the top cap before you glue the top cap onto the hollow body. Wall thickness is 1mm on hollow body.



For 3D printing a model:
https://www.printables.com/model/1008941-lev50-top-section/related
https://www.printables.com/model/1008943-lev50-bottom-section

For quoting purposes:
https://www.printables.com/model/1011773-lev50-cell-complete

Jim

 

[Jiminy]

I would also like to get the dimensions of the red lines seen in the photo below. I really need the outside dimensions of the 4 cell tray. All trays are the same and they will be roughly 177x191 but I need to get exact numbers. If anybody has a spare 4 cell tray I would be happy to pay you to borrow it and can also send a prepaid shipping label for shipping within the US. Or if anyone has a tray and can mark up the photo in Microsoft Paint and send it back to me via PM that would be swell.

 

[Jiminy]

Can anyone give me the dimensions of the recess for the 8S battery modules?

 

[MickeyS70]

Mine are slightly different, which dimensions do you need below?

 

[kiev]

Mine are slightly different

That copper jumper wire doesn't look large enough to carry much current--must just be for bench testing?

 

[MickeyS70]

That copper jumper wire doesn't look large enough to carry much current--must just be for bench testing?

Correct, only use this setup to test CMUs…

 

[ChristopheFR]

Bonjour Jiminy,
J'étudie également la modernisation du pack batterie de mon czero. Pourriez-vous compléter votre excellent dessin en indiquant les distances que j'ai tracées sur le dessin ci-joint ?
Cela me permettrait de demander à un fabricant des prix pour une production en petite série
Merci