inverter 2014...??

[Kiste]

Is there any chance of help with a picture from inside the the top of the inverter showing the high voltage fuse for the obcd from a i miev 2014 mod?

 

[kiev]

Can you post a picture of your engine room showing the MCU?

The fuse is located under the little access cover in the lid for all versions as far as we know.

 

[Kiste]

Can you post a picture of your engine room showing the MCU?

The fuse is located under the little access cover in the lid for all versions as far as we know.

Hi thanks for reply and the sharing of knowledge .. Here are my trunk/project/disaster/adventure The onboard charger was blown along with the fuse in the inverter. I have swapped the onboard charger and got a new fuse but it looks way to big. Its almost a year ago since i de assembled everything and wasnt smart enough to take a picture inside the inverter so the memory of the inverter is not complete

 

[Kiste]

Hi thanks for reply and the sharing of knowledge .. Here are my trunk/project/disaster/adventure The onboard charger was blown along with the fuse in the inverter. I have swapped the onboard charger and got a new fuse but it looks way to big. Its almost a year ago since i de assembled everything and wasnt smart enough to take a picture inside the inverter so the memory of the inverter is not complete

Is this the right place to assemble the fuse?

 

[kiev]

That doesn't look like the correct fuse--where did you get it?

Trace the path from the OBC HV+ thru the output harness around to the side of the MCU where it enters and bolts in. Then ring out the circuit from that + flange to the philips head screw, and from the HV+ from the traction pack to the other philips head screw. i think the fuse mounts to those philips head screws, but that is just my guess from looking at your photos. Use your meter to check continuity and voltage if necessary (carefully).

This is my guess and you should check if this is correct before using it