Need your ETACS configuration from your car

[hjdlsnbc]

I am doing research to finally complete my task and need as many ETACS configuration files from as many different cars as possible. Could you please extract the .cuf file with MUT-3 SE and upload it here? I think none of the cars output a .con, but if so, this would be interesting.
Please do not forget to tell what model year and region your car is. Also if its a imiev, c-zero or iOn model.
The file is under 2kilobyte. Its perfectly small to be upload here to the forum packaged in a .zip archive. This would help more then just me in developing software that supports the imiev.

 

[Rational]

Sure.

I am doing research to finally complete my task and need as many ETACS configuration files from as many different cars as possible. Could you please extract the .cuf file with MUT-3 SE and upload it here? I think none of the cars output a .con, but if so, this would be interesting.
Please do not forget to tell what model year and region your car is. Also if its a imiev, c-zero or iOn model.
The file is under 2kilobyte. Its perfectly small to be upload here to the forum packaged in a .zip archive. This would help more then just me in developing software that supports the imiev.

What are the exact steps I need to perform to retrieve the file for you?

 

[hjdlsnbc]

Just follow the manual. In the MUT3 manual 9-4-1 - 9-4-2.
If you care about privacy you can remove the VIN from the filename. To my understating the VIN is not a ETACS config. So its also not in the config itself.

Of course everyone who upload the ETACS to here have also a second benefit: A backup outside of your house/car. So if you crash the car and need a ETACS replacement, you still have your ETACS config to download and put on a replacement ETACS.

 

[Rational]

Just follow the manual. In the MUT3 manual 9-4-1 - 9-4-2.
If you care about privacy you can remove the VIN from the filename. To my understating the VIN is not a ETACS config. So its also not in the config itself.

Of course everyone who upload the ETACS to here have also a second benefit: A backup outside of your house/car. So if you crash the car and need a ETACS replacement, you still have your ETACS config to download and put on a replacement ETACS.

Here is my file.

I don't mind leaving the chassis number.

This is a 2011 Japanese Domestic Market (JDM) i-miev with 16kWh pack.

When opened in wordpad it shows the following. So it seems to be a very simple file.

Perhaps the settings are saved as digits within. So maybe you can adjust your settings withing MUT3SE one by one and resave the file and compare the differences to see what each setting changes and where in the string?

If each permutation were changed, saved and documented we could determine each setting's variable for direct editing.




Also, my settings in this file are no longer completely default as I changed one setting last week. I changed my door alarm sensor setting from default to something else that I thought would stop the beeping when the door was open but it had no effect.