Main Traction Battery Upgrade i-MiEV using CATL93Ah cells

Mitsubishi i-MiEV Forum

Help Support Mitsubishi i-MiEV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Yes I'm sure, my C-Zero is from 2012, I connected the ION app and I read 88 cells.
In fact the battery pack of my C-zero is 16KWh unlike the 80 cell one which is 14KWh. ;)
 

Attachments

  • ION.jpeg
    ION.jpeg
    67.9 KB
First of all, there are many threads already here about this type of endeavor.
I was asked to start a thread on my project. I must say I couldn't have gotten this far without all the great posts on this and other forums.

I have had a few setbacks but won't bore you with the details.

Current state of the project:
New battery cells 93Ah NMC are installed in the vehicle.
Range was reset with MUT3 SE using windows driver by kolyandex to 45 Ah.
Current range 66 miles.

I accomplished this last year but then got in an accident and had to find a new car to finish this project.
When I moved the battery pack to the new vehicle I had a bad temperature sensor on one CMU board and the vehicle would not go over 35 mph or charge.
So, I put a CAN bridge between the CMU and the BMU to fake the data for that one sensor.
I was able to charge the battery to full and it drove normally.

Hardware:
I used an Arduino Due with a Dual CAN Bridge made by Daniel Kasamis from ~bit TOGGLEBIT.
The Cells I used I bought from Alibaba. 93Ah 3.7V nominal charge to 4.2V
They also sell a 75Ah that will fit in the original space.
I paid around $70 a cell with shipping to the USA from China.

One thing I didn't notice was the size of the terminals. they were M6 and the LEV50 had M8's. The sales rep said they could change these but I already had the cells.

I will add posts as I think and decide what would be useful for people that want to do their own.
CATL93 new stock just got today after one year waiting
 

Attachments

  • catl.png
    catl.png
    231.1 KB
Back
Top