Search results

@Gencis After you clear the codes with the scanner, remember to turn the ignition key off. Wait a minute, then turn ignition on. Then when you scan for the fault, it should have been cleared, and should not show as active. Currently, when I clear the fault codes on mine, provided I don't turn...

Re-acquired the Launch x-341 scanner and cleared the codes again, as last week. Car started. Drove the car to reduce battery capacity from full, to 4 bars used, with air-con & heating on. Everything works fine. Lights/ windscreen wipers/ heater fan/ electric windows/ there ere no issues with...

Ok, managed to borrow a Launch bi-directional pro scanner. Set the vin number. wrote to the BMU Eprom the traction battery date, and reset. Did not clear yellow icar fault. Ran a search of fault codes & cleared 4. Did not cure yellow icar fault Ran a search on EV-ECU fault codes & cleared. FAULT...

Amazingly, we are suffering the same problem, at the moment. During lockdown the car has been left for 2 to 3 months, with traction battery at about half charge, and the 12v auxiliary battery removed. So charged the auxiliary battery, plonked it back in the car, and drove it round the block, to...

Have you pressed any 'buttons' on the dongle, to make sure the bluetooth is active, so then the android device can see it?