i-MiEV and Lexia 3 and Diagbox

[Turnik79]

Someone tried to run the MUT 3 program with lexia 3? Will it work with imiev?

[smueller99au]

I can confirm that the Peugeot Diagbox software and adapter works just fine with all 3 cars - iMiev, Ion and C-zero. I have used it successfully on all three (I currently have an Ion and iMiev, but have used it on a friends C-zero without problems).

Regarding the RPO number, just enter 00000 (five zero's) and it's accepted.

Have fun!

[datom]

Really? That's great news.
I have Diagbox but never tried it on an i-Miev because i heard it didn't work with Mitsubishi's variant of the car.

[datom]

Ups, my fault. I think I have Lexia, does that work, too?

[DBMandrake]

Lexia 3 is the interface hardware. Diagbox is the software you run.

[datom]

Thank you. I will give it a try

[datom]

Can you be a bit more specific? What version of Diagbox did you run? What operation system?
Thanks!

I can confirm that the Peugeot Diagbox software and adapter works just fine with all 3 cars - iMiev, Ion and C-zero. I have used it successfully on all three (I currently have an Ion and iMiev, but have used it on a friends C-zero without problems).

Regarding the RPO number, just enter 00000 (five zero's) and it's accepted.

Have fun!

[datom]

OK, tried it. It worked with my I-Miev!
China Lexia, Diagbox, C-Zero or Ion selected, detected the car and read fault codes.
I also programmed the comfort flashing function.
Global test did repeatedly not find all modules. Which ones it did not find varied.
Thanks for letting us know!

Is there any function in MUT III that is not available in Diagbox?

[smueller99au]

Can you be a bit more specific? What version of Diagbox did you run? What operation system?
Thanks!

I can confirm that the Peugeot Diagbox software and adapter works just fine with all 3 cars - iMiev, Ion and C-zero. I have used it successfully on all three (I currently have an Ion and iMiev, but have used it on a friends C-zero without problems).

Regarding the RPO number, just enter 00000 (five zero's) and it's accepted.

Have fun!

Sorry for the delay in posting... I've been busy fixing my DC/DC charger. Solved now.

I use a VMWare Windows XP Pro installation with Diagbox 7.57. It works just fine will all 3 cars. Note that the Ion and Citroen have the PSAradio together with the PSA SOS box in Europe. Whenever I run Diagbox on all the cars it always comes with a comms fault on the steering wheel controls because they just don't exist on these builds. But this is normal - it also happens on my Peugeot 5008 and 206. There are some ECU's that are not in all builds.

[JoeS]

MickeyS70 had mentioned this in another thread, so I thought I'd post it here as well as his slightly-edited follow-up response to a PM from me. Thank you, MickeyS70!

Also, I've updated the description and links in the Tech/Reference Articles (Read Only) to include this thread.
Testing and Monitoring Apps and Tools and Scanners

By now I would also really like to know where I find a MUT(3?) for the car here in DK?
I have an OBD2 LX dongle from Scantool (for canIon)

Hi there
I was looking for an MUT3 for ages until someone mentioned that Lexia/Diagbox (for IOn/C-Zero) will also work with an I-MIEV. So I recently got a clone on AliExpress and luckily I still had an old laptop running Win XP.

Haven’t had the chance to do in-depth testing but so far it works great and seems to be a real low cost (less than $100) alternative to MUT 3.

I went on AliExpress and searched for “Lexia3 Diagbox” ...

I got mine shipped from France so it arrived within a week.

The DVD provided has various versions and good installation instructions; I went as far as v7.57 and it works just fine.

It also specifically mentions that the SW will only run on 32bit windows (XP) but this can be done on any OS using VMWare or similar; just adds a bit more complexity but well worth the effort…