FiddlerJohn
Well-known member
This is a table of "CUSTOMIZATION FUNCTIONS."
Drawings: http://www.facebook.com/media/set/?set=a.3001581230948.2128519.1004832596&type=1&l=431b54b062
By operating the M.U.T.-III ETACS system , the following functions can be customized. The programmed information is held even when the battery is disconnected.
There are four columns (1-4). The second row starts with the third column (3. Adjusting content (M.U.T.-III display).
1. Adjustment item (M.U.T.-III display) 2. Adjustment item 3. Adjusting content (M.U.T.-III display) 4. Adjusting content
Door-ajar warning function Door-ajar warning buzzer function Operation Door-ajar indicator and buzzer work. (Works 16 times) (Initial setting)
Drawings: http://www.facebook.com/media/set/?set=a.3001581230948.2128519.1004832596&type=1&l=431b54b062
By operating the M.U.T.-III ETACS system , the following functions can be customized. The programmed information is held even when the battery is disconnected.
There are four columns (1-4). The second row starts with the third column (3. Adjusting content (M.U.T.-III display).
1. Adjustment item (M.U.T.-III display) 2. Adjustment item 3. Adjusting content (M.U.T.-III display) 4. Adjusting content
Door-ajar warning function Door-ajar warning buzzer function Operation Door-ajar indicator and buzzer work. (Works 16 times) (Initial setting)
- Only indicator Only door-ajar indicator works.
Constantly Door-ajar indicator and buzzer work. (Without the number limit)
- Operation(Type A) Differs from standard tone
- ACC or IG1 Operation enabled when electric motor switch in ACC or ON
- 400 msec With function: Switch acceptance time is 0.4 second.
800 msec With function: Switch acceptance time is 0.8 second.
- Lock 2 Unlock 0 LOCK: Flash twice, UNLOCK: No flash
Lock 0 Unlock 1 LOCK: No flash, UNLOCK: Flash once
Lock 2 Unlock 1 LOCK: Flash twice, UNLOCK: Flash once
Lock 0 Unlock 2 LOCK: No flash, UNLOCK: Flash twice
Lock 1 Unlock 0 LOCK: Flashes once, UNLOCK: No flash
Lock 1 Unlock 2 LOCK: Flashes once, UNLOCK: Flashes twice (Initial setting)
- inhibit No function
- inhibit No function
- 4 sec. 4 sec.
continuous continuous*
16sec/continuous 16 sec/continuous*
8sec/continuous 8 sec/continuous*
4sec/continuous 4 sec/continuous*
8 sec. 8 sec (Initial setting)
- OP/CL IG/PWR SW Electric motor switch linked operation
OPN/CLS Keyles Keyless entry linked operation
Not Auto No synchronised operation
- Not operation No function
- insensitive Low ambient brightness
normal Standard ambient brightness (Initial setting)
sensitive High ambient brightness
- inhibit No function (Initial setting)
- 120 sec. 120 seconds
60 sec. 60 seconds
30 sec. 30 seconds (Initial setting)
- not operate No function
- 120 sec. 120 seconds
60 sec. 60 seconds
30 sec. 30 seconds
15 sec. 15 seconds (initial setting)
7.5 sec. 7.5 seconds
0 sec. 0 second (no delay shutdown time)
- Disable No function