I am trying to test my original 2012 iMiEV SE, which I had sold to a friend. When I take the OBDLink LX out of my own i-MiEV and plug it into this car it pairs up fine, displays the new VIN, and all the readings seem to display properly except for the Ah, which displays the number from the car previously tested.
This does not happen when I switch between my two existing 2012 SE Premiums, as doing that properly displays each car's Ah.
Sorry, I don't remember if we've discussed this before, as all I recall is there being a problem reading that function on a 2016 i-MiEV.
Thankfully, using the iCarSoft i909 does provide me with the Ah number, but I would like to confirm it using CaniOn.
I'm presently on CaniOn v.150
EVs: Two '12 Wht/Blu SE Prem., '13 TeslaMS85, three 156v CorbinSparrowsLi(NMC), 24v EcoScoot(LiFePO4)
EV Conv: 156v '86 Ram PU, 144v '65 Saab96
Hybrids: 48v1kW bike
Mothballed ICE: Orig.Owner '67 Saab96V4, '88 IsuzuTrooper; '76 MBZ L206D RHD RV