Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Thank you for looking at this in detail, it's always good to have someone else to check the drawings.My finding was from a measurement on the board using smart tweezers; with all the parallel paths it is not likely an accurate value. i haven't removed any parts to measure separately, but for sure i would be happy to change the values to a better measurement. 3 parallel 390nF gives nearly 1uF, so that is likely the design target and the three were used to provide some redundancy?
Thank you for looking at this in detail, it's always good to have someone else to check the drawings.
My finding was from a measurement on the board using smart tweezers; with all the parallel paths it is not likely an accurate value.
i haven't removed any parts to measure separately, but for sure i would be happy to change the values to a better measurement. 3 parallel 390nF gives nearly 1uF, so that is likely the design target and the three were used to provide some redundancy?
