Reply to thread

Mitsubishi i-MiEV Forum

Help Support Mitsubishi i-MiEV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

It wasn't clear to me that there was a defective LTC chip, maybe so, but there were 2 very low cells, #38 and #42.


So after swapping out a CMU05 board, the low cell #38 is not reading low anymore?  Was the cell voltage actually measured with a voltmeter to verify it's actual reading before and after the CMU?


As long as the pack is open, maybe some other tests might be to put the old CMU back in to see if the problem returns.  And move cell #38 to another location.  Change some things around and see what the tools show, etc.


i would definitely want to put a meter on CMU06 cells (cell #42)  to get measurements.


Back
Top