Reply to thread

Mitsubishi i-MiEV Forum

Help Support Mitsubishi i-MiEV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I use something very similar to this:


http://www.amazon.com/120-240V-kWh-Meter-Single-phase/dp/B00GHSL9OK/ref=sr_1_8?ie=UTF8&qid=1386764285&sr=8-8&keywords=ekm+metering


I have a dedicated outlet for my EVSE Upgraded cord, which I have set up to be switchable between 120 volt (Level 1) and 240 volt (Level 2), and this meter will read current for both voltages. You do need to have two hots go through the meter, and the neutral and ground go around the meter. Since you're doing level 2, you should be fine. I can send you a picture if you'd like.


Back
Top