Reply to thread

Mitsubishi i-MiEV Forum

Help Support Mitsubishi i-MiEV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hi Jay,

As I've posted in a number of places (gawd, we've got too many scattered topics on this Forum), my Remote has a hard time communicating with my iMiEV when the SPX L2 EVSE is plugged in.

http://myimiev.com/forum/viewtopic.php?p=4690#p4690

Used to be I would need to push the Enter button one or two times on the Remote in order to get an error-free "take". After I had the the Cell Monitoring Unit update done this week, I tried it five times and it gave me an error each time for the on->off time entry, so I've given up and simply use a manual wall timer. The pre-heat did work with the Remote using the SPX.

The Remote works just fine first time every time using Mitsu's L1 (Panasonic) EVSE. I haven't tried using the SPX in L1 mode to see if it works with the Remote.

The SPX L2 EVSE works just fine as long as the Remote is not used for controlling the charge time. I did have a one-time aberration right after the upgrade (an unexplained charging shutdown), but it has not recurred.


Back
Top