Reply to thread

Mitsubishi i-MiEV Forum

Help Support Mitsubishi i-MiEV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Thread necromancy, but....


The clock spring you need is 8619-A017 - the one on the car is either this one (US models with CC and/or media controls) or 8619-A016  (horn only) - you can get it on Aliexpress for about US $10


8619-A018 looks almost identical but has an incompatible airbag connector


the other 8619-series modules aren't physically compatible


If you want to create a heated steering wheel (2amps required) you'll need to be prepared to do a lot of customisation but the good news is that an arduino should fit into the back of the steering wheel assembly if you wanted to repurpose the 2 resistive signalling pairs for other purposes


It's worth looking at https://iserv.nl/files/pics/imiev/arduino/Steering%20wheel%20controls%20for%20the%20Mitsubishi%20i-MiEV.htm


Back
Top