Thanks for all the helpful info on Canion. The tool and the data it can capture are very useful.
Unfortunately, I am having problems with my OBDLink LX connection to Canion on my Samsung S6. It is continuously connecting and disconnecting. When I reported the problem, Scantool.net very kindly sent me a replacement. Unfortunately, the problem is still happening with the new unit and customer support suggested I check in here to see if there is a fix.
It starts to work and says it is connected then shows dialogue box "Bluetooth pairing request. Confirm passkey is (number changes every time) to pair with OBDLinkLX" Then before I can enter any numbers text comes up at the bottom of the screen that says "Unable to pair with OBDLinkLX. Make sure OBDLink LX is ready to pair." This sequence of events happens repeatedly every 10 seconds or so from there.
Below is that data Scantool asked for when they were trying to find the problem:
Which scan tool are you using? OBDLink LX
Connection type (serial port, USB, Bluetooth)? Bluetooth
What is the serial number and manufacturing date of your device? This information can be found on the back of the unit. 10r-05 8941, Rev 1.2/R4 Mfr. 2017.12.09 Ser# 115510251936
What is the operating system? Specify whether it is 32 or 64 bit Samsung S6 smartphone
What is the year, make, model, and country where the vehicle was purchased in, new? 2012 Mitsubishi 1-miev, USA, New
If known, what is the engine type (gasoline or diesel, number of cylinders, displacement). All electric
Which software are you using (name + version)? OBDLink App v. 4.3.0 and CaniOn141 App v.141
Describe the problem in detail: Difficulty connecting and once it is connected it automatically disconnects repeatedly
Which step of the Quick Start Guide are you having trouble with? Pairing and connecting
Any thoughts on a fix would be appreciated.
Robert
