Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I love your attitude! If you want to attempt get into balance the lowest charge rate will do the best. The BMS makes the charger bail out on the charge cycle once a cell reaches the high set point. The slower the charge rate the better the shunts can keep that from happening. L1 of course, and if you have the EVSE upgrade where you can select amperage as low as 1 amp for the finish charge wouldn't be a bad idea (if it goes that low, that is). I had some 7 cell packs that were left abandoned for a long time before I acquired them. Very out of balance and I had to rig a C/65 charge rate and be very patient to bring them into line. Looking forward to the reports.Aerowhatt
I love your attitude! If you want to attempt get into balance the lowest charge rate will do the best. The BMS makes the charger bail out on the charge cycle once a cell reaches the high set point. The slower the charge rate the better the shunts can keep that from happening. L1 of course, and if you have the EVSE upgrade where you can select amperage as low as 1 amp for the finish charge wouldn't be a bad idea (if it goes that low, that is). I had some 7 cell packs that were left abandoned for a long time before I acquired them. Very out of balance and I had to rig a C/65 charge rate and be very patient to bring them into line. Looking forward to the reports.
Aerowhatt
