Go to advanced search

by bezzeb
Thu May 06, 2021 9:42 am
Forum: Batteries and Battery Management
Topic: No READY. P1A15 error. Condenser charge timeout.
Replies: 142
Views: 65504

Re: No READY. P1A15 error. Condenser charge timeout.

kiev wrote:Was your op amp definitely bad--let us know how this works out for you.

yes, after replacement AD8677 the car started up
but not for long.
As I understand it, the problem is in the capacitors, which, after heating, give an error again
by bezzeb
Thu May 06, 2021 9:40 am
Forum: General Technical Discussions
Topic: Problemwith MCU P062F
Replies: 17
Views: 1053

Re: Problem with MCU P062F

There are members who have discussed programming the VIN in the P1A15 threads started by Lic and Gencis who may be able to give you some advice. Did you remove the eeprom when reading and programming, or try to do it while still on the board? What voltage did you use for Vcc and for the serial line...
by bezzeb
Thu May 06, 2021 12:56 am
Forum: General Technical Discussions
Topic: Problemwith MCU P062F
Replies: 17
Views: 1053

Re: Problemwith MCU P062F

So comparing the eeprom data between the two MCU--in all the other addresses with the random/unknown values other than the VIN and SERIAL Number, Are they identical? there are differences in multiple lines but there is an opportunity to somehow reprogram the immobilizer in order to install a second...
by bezzeb
Wed May 05, 2021 12:27 am
Forum: General Technical Discussions
Topic: Problemwith MCU P062F
Replies: 17
Views: 1053

Re: Problemwith MCU P062F

Thank you for the answers and for posting the full eeprom contents. It appears to be other data stored which we do not know the purpose, or if it is corrupted or correct. But we need to figure out how to calculate the correct check sum for your VIN. I took as a basis the second MCU with unchanged e...
by bezzeb
Tue May 04, 2021 1:56 pm
Forum: General Technical Discussions
Topic: Problemwith MCU P062F
Replies: 17
Views: 1053

Re: Problem with MCU P062F

To help understanding, please confirm or correct the following: 1. Your car is a 2012 Mitsubishi iMiev with VIN# JMBLDHA3WCU00610 ? 2. When you got the car it came with an MCU from a 2011 Peugeot iOn (VIN ..801988) with MCU serial# CF1101004920 ? 3. In the 24C64 eeprom, the VIN and Serial Number ar...
by bezzeb
Tue May 04, 2021 9:25 am
Forum: General Technical Discussions
Topic: Problemwith MCU P062F
Replies: 17
Views: 1053

Re: Problemwith MCU P062F

I took off my mcu from the car today Here are the data that was in my first mcu https://b.radikal.ru/b11/2105/c4/47d36de67d8b.jpg https://b.radikal.ru/b04/2105/8b/421e87065252.jpg https://b.radikal.ru/b00/2105/23/13c3aca27342.jpg https://a.radikal.ru/a28/2105/10/cd498dfaebf3.jpg I only changed the v...
by bezzeb
Sun May 02, 2021 12:32 am
Forum: General Technical Discussions
Topic: Problemwith MCU P062F
Replies: 17
Views: 1053

Re: Problemwith MCU P062F

If you look at the label on the MCU, there will be a part number and serial number. 9499A620 is a Mitsubishi part number for the MCU, and the C... number is the serial number. i suspect that those must also match in the eeprom in addition to the VIN; also if these are changed then the checksum will...
by bezzeb
Sat May 01, 2021 1:04 am
Forum: General Technical Discussions
Topic: Problemwith MCU P062F
Replies: 17
Views: 1053

Re: Problemwith MCU P062F

Thank you for posting the contents of the eeprom. What are the 2 bytes at the end of the line after the VIN--is that a checksum? What is the part number of your MCU? Is it 9499A620 ? What about the serial number, does it match the MCU in the car? CF1101004920 and 2 bytes for check sum? sorry but i ...
by bezzeb
Fri Apr 30, 2021 11:20 am
Forum: General Technical Discussions
Topic: Problemwith MCU P062F
Replies: 17
Views: 1053

Re: Problemwith MCU P062F

Which car make/model do you have miev, czero, Ion ? How did you reflash the VIN into the MCU eeprom, using an external programming device or with the OEM tool? mitsubishi i-miev 2012 i have external programming device i change 2 vin number in hex EEPROM https://c.radikal.ru/c43/2104/b8/8b9bffab580b...
by bezzeb
Fri Apr 30, 2021 9:54 am
Forum: General Technical Discussions
Topic: Problemwith MCU P062F
Replies: 17
Views: 1053

Problemwith MCU P062F

Hello My car arrived with a non-original inverter (MCU) It did not start until I reflashed the VIN number in the EEPROM (MCU). After this, the car started but with an error and after 60 km / h i have a turtle The problem with the turtle can be solved if I delete the error in MCU (P062F) and EVC (P1A...

Go to advanced search