Recent content by shuma89

Mitsubishi i-MiEV Forum

Help Support Mitsubishi i-MiEV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. S

    hobdrive - and i-MIEV ion zero, show electronic control units, reset errors

    Hello everybody I want to see internal reaistences of battery cells, can this program do this? And if it is possivle to use this program for nissan leaf gen1 2010-2017?
  2. S

    Cell resistence, how to see?

    Hello averyone. I want to see resistences of all battery cels, can any program do this? I have obd elm only, can anybody tell me what program see this parameter?
  3. S

    The Troubleshooting and Repair for On-board Charger (OBC) Thread

    Thous extra wires are for capacitors, one capasitor was blown near the relay, 2.2 mkf My car is Nissan leaf 2012 and best angle for photo was that angle, what I made photos. Tonight the white ceramic capasitor was blown. It was second charging after it was changed by me. May the reason be from...
  4. S

    The Troubleshooting and Repair for On-board Charger (OBC) Thread

    It is after 2,5 hour of charging. If drive transistors have problem they can work hotter then usual? I think that relay have not problem, if drive transistors work hotter then usual, it can make effect relay temperature also and may be it reaches 100⁰ or more?
  5. S

    The Troubleshooting and Repair for On-board Charger (OBC) Thread

    It is picture with thermal camera. 52⁰ is ralay temperature, 98⁰is driver transistors temperature, is this normal? In my mind difference of relay and driver temperature 50⁰ is very high. Is this normal?
  6. S

    The Troubleshooting and Repair for On-board Charger (OBC) Thread

    thank you bro. I will test resistence of relay on problematic charger, how many ohm-s would it be?
  7. S

    The Troubleshooting and Repair for On-board Charger (OBC) Thread

    Thank for answer. In my case charging starts, after 10-15 minutes or after 1-2 hour charging stops, and i see burned resistor. It ceramic resistor is for precharge, is it right? When charging starts relay works, but after several minute or hour resistor burnes, i think thet something stops...
  8. S

    The Troubleshooting and Repair for On-board Charger (OBC) Thread

    hello everyone. i have nissan leaf gen1 2012 i have problem inside of onboard charger. i change 4,7ohm resistor, it was burned. car charged 3-4 times and it burned again, i change this resistor, after 2-3 charge it blows, there is 3 pieces of 4,7 ohm 5W resistor, i have changed all of them wigh...
  9. S

    diagnostic from android

    Please link me iCarSoft i909
  10. S

    diagnostic from android

    what APP is for mitsubishi diagnostic? nissan leaf has LEAF SPY PRO I want good APP for diagnostic DTC-s on mitsubishi EV. I have condintioner problem and do not know what is problem.
  11. S

    diagnostic from android

    i want to know which diagnostic app is better for diagnostic mitsubishi EV. I have androis, OBD and I can see DTC-s and clean them with LEAF SPY on nissan leaf,can you suggest me better APP-s for mitsubishi.
  12. S

    The Troubleshooting and Repair for On-board Charger (OBC) Thread

    You can point on the power board this IC? and what controlls the PWM for IGBT-s of inverter?
  13. S

    The Troubleshooting and Repair for On-board Charger (OBC) Thread

    I am beginer. i want to know wich type of IGBT swiching control is used to control WAFFLE PLATE IGBT-s? 8 IGBT for inverter and 3 IGBT for power conditioning.
  14. S

    The Troubleshooting and Repair for On-board Charger (OBC) Thread

    Can you give me schems of second gen OBC? I want to see what model diodes are for protect the IGBT-s.
  15. S

    Gen1 DCDC Converter Troubleshooting and Repair

    Anybody knows transistor models in waffle plate on obc?
Back
Top