pbui19's latest activity

sounds like an Enginer kit, which was designed for the Prius. It seems upgrading the pack is more less straight forward, cell...

have been keeping an eye for an inexpensive Chademo plug as well, hoping that there would be plenty in the States as more and more EVs...

Kiev - where do you get all these schematics ?

for overnight charging when there's plenty of hours, even a 16A EVSE is sufficient. We have 2x Bolts and have been using the hacked...

that's a great find Joe, Amz has a suggestion for one with current sensing on the same web page, no idea of its accuracy...

thanks for the tip, I'll check out the Shelly switch. I think controlling the J1772 trigger, which is a low voltage reed switch anyway...

vaguely recalled a discussion about possible damaging to the on-board charger by abrupt AC disconnect ? may be it is no longer the...

I think it'll be ok, though I would put a whitish cover given that it's black. And for sure keep the pack no more than 50%, 40%...

what about pulling the old Enginer Prius extender concept ? back in the early days, Enginer added a 4kwh 48v pack and a DC-DC boost to...

I wonder whether the pack's BMS slow capacity decay over time between calibration charges has been modified or eliminated ? always...

I would put a charger on the 12v pronto, especially in the cold temperature. It is not getting charge by the iMiev. By the way, what...

so did you buy back from the insurance company ? as it was still drivable ? guess not as your pix caption says "a pick up truck will...