Recent content by NoBeard

And I'd still love even more someone figuring out how to hack the sound so we could replace it with whatever we wanted! NB

And now for "The Rest of the Story" ;), (apologies to Paul Harvey for that) So, turned out that one of 4 pads was worn out due to it being stuck in the caliper. I was told that the front brakes need to be pulled out and the calipers lubed every 2 years per the service guide, which made me laugh...

Local Mitsu Dealer, not iMiev Certified, first one they've seen. Both the outboards are like new. Inboards are hard to see through the inspection holes, but I think they're fine. Going to take it to another independant shop first of the week and get confirmation they're fine. NB

Left them full size so you can have a good look.... One each of the outboards and one through the inspection hole, looks to me like they're all fine... Hard to tell what the pad is through the hole, you need to spin the disk to figure out what is what, but when you've done that, it's obvious.

Thanks for all the great responses, I'm even more convinced it shouldn't be like this, but I'm waiting to hear from the dealer to see what they have to say. Will try and get a picture, been wanting to have a look myself to confirm anyway. The way they spoke it was all 4, Summer range was...

So here's an interesting experience... Went for our annual tax grab of a vehicle inspection. Our iKegDeliveryVehicle has been working 12 months, has 14,500 km and we've been told our front brakes are under the 2 mm threshold. The local dealership is not an iMiev dealer, and this is the first...

So I'm getting from the posts that the heater is powered by the charger, and therefore limited to 3.3 KW, as opposed to the charging circuit being separate from the heater circuit as I would have designed it, so that excess available amperage could be used by the heater circuit all the way up to...

Hi, we're looking at which L2 charger to get and we're wondering if a higher level of amperage will increase the heat provided during a pre-heat. When using the L1 charger the pre-heat is nominal, but when I plug in to the in town commercial L2 chargers, the pre-heat we get from them is really...

Just posted images of the KDeV here... http://myimiev.com/forum/viewtopic.php?f=6&t=2374&p=19252

Here's "Buzz" our new Keg Delivery Vehicle... NB

If anyone can figure out how to hack the sound we'd be really interested! Ours is being used as a delivery vehicle for our Mead and will be logo'd up with bees on it....we'd LOVE to replace the sound with a recording of our bee hive! NB

Thanks to everyone for the input, pulled the trigger today. Picked up a demo '13 today, will be signing paper tomorrow and seeing it next week. Can't wait. NB

Thanks so much for this! We're using 20's only in our startup meadery so sounds like we'll have no problems with it at all. We're also using the one way plastic kegs, so the weight really won't be an issue either from the sound of it. NB

Thanks for that, the actual measurement is 24" tall by 11" inches across, looks from that photo like it might fit well. Will definitely have to do a reccy at the localish dealer now. Thanks, NB