Recent content by ErikC

Mitsubishi i-MiEV Forum

Help Support Mitsubishi i-MiEV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. E

    Can bus failures

    Is the transponder also mount in the simple key? I am able to work with both keys (remote and simple). The car is put into Ready mode and a ride is fine. Sometimes the yellow indicator 'car + exclamation mark' is active. After reading the fault codes, it seems that the cooling pump is the...
  2. E

    Can bus failures

    I have bought a battery CR1620 for the key. Replacing it does not help since the voltage is still correct: 3.0V. Moreover I can lock/open the car doors with the remote control. After placing new 3V into the key, the car will not go the Ready mode. After several attempts (~ 10 times), this mode...
  3. E

    Can bus failures

    Using the actuator testing, the pump is working for a few seconds. After many attempts with fault reading and erasing, the car is drivable. The READY mode is working and am also able to drive. I need to prove that it is resolved permanently. So I re-tried to start the car at next day. This car...
  4. E

    Can bus failures

    It seems that a lot of errors are out of date (a few weeks ago). I have erased all codes per ECU. Finally, the Ready mode is working and I can drive the car. However I see a yellow warning indicator "car + exclamation mark in the middle of car". After reading car status via diagnostic tool...
  5. E

    Can bus failures

    I have a broken Peugeot Ion. After reading the failure codes via ODB2 connector, it seems a set of ECU (or parts) is not accessible. Is it related to any small power circuitry that is broken? Who can point me out to find the root cause? Important notes: Charging via AC connector to main...
Back
Top