Car Keys

Mitsubishi i-MiEV Forum

Help Support Mitsubishi i-MiEV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jjlink

Well-known member
Joined
Sep 11, 2011
Messages
403
Location
San Francisco Bay Area, CA
Anyone know if you can use a car key blank from a Mitsubishi 2011 car on the 'i'. I don't need the remote on this key, it just needs to open the door, like a plan old key. I see some keys like that (no electronics inside) on eBay for other models like the Eclipse.
 
If you are just unlocking the door using the mechanical lock then it should work no problem. If you can find cheap programmable keys then you can also program them yourself using your 'i' and both your other remote keys.
 
Has anyone tried to make a copy of their 'i' key yet? I took mine to the local hardware store and they put it in their chip-key scanner. According to them, it's a chip key that they can't just make from a blank. Can anyone confirm this?
 
I was told the same thing at OSH. I suspect you can get a blank key for a Mitsubishi Eclipse or another model it may work, but not knowing any owners of the other models I can't confirm it. There are keys sold on Ebay and other sites that may work as well made for other Mitsubishi car models.
 
Has anyone else tried actually physically putting the car key in the door and opening the door without using the remote to unlock the door first? I tried it with the alarm system armed (the fast red flashing light on the dashboard, not slow flashing) and the car alarm starts blowing the horn right away. :?:
 
The alarm is activated when locking the door with the remote. So yes, I can just lock the door manually with the key and the alarm is not activated. Of course this defeats the whole purpose of having the alarm, however it is a temporary workaround.

I don't have this issue with any other car I have ever owned. But its interesting that on the "classic" Prius the alarm LED does still flashes after opening the door with the key (not the remote) but the alarm does not trigger.
 
I just called my Mitsubishi dealer to see what it would cost to get an official copy of the key. It's $185 for the key and $65 for the programming. That's $250 for a spare key! I wanted to make an extra copy to leave with a neighbor, but not at that price. I hope the generic chip-key makers can provide a key for the i soon.
 
http://www.gpo.gov/fdsys/pkg/FR-2012-04-04/html/2012-8049.htm
[Federal Register Volume 77, Number 65 (Wednesday, April 4, 2012)]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]

DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration

Petition for Exemption From the Vehicle Theft Prevention Standard; Mitsubishi Motors

ACTION: Grant of petition for exemption.


-----------------------------------------------------------------------

SUMMARY: This document grants in full the Mitsubishi Motors R&D of
America, Inc.'s (Mitsubishi) petition for exemption of the Mitsubishi
i-MiEV vehicle line in accordance with 49 CFR part 543, Exemption From
the Theft Prevention Standard. This petition is granted, because the
agency has determined that the antitheft device to be placed on the
line as standard equipment is likely to be as effective in reducing and
deterring motor vehicle theft as compliance with the parts-marking
requirements of the 49 CFR part 541, Federal Motor Vehicle Theft
Prevention Standard. Mitsubishi requested confidential treatment for
specific information in its petition. The agency addressed Mitsubishi's
request for confidential treatment by letter dated February 14, 2012.

DATES: The exemption granted by this notice is effective beginning with
the 2013 model year (MY).


SUPPLEMENTARY INFORMATION: In a petition dated January 3, 2012,
Mitsubishi requested exemption from the parts-marking requirements of
the Theft Prevention Standard (49 CFR Part 541) for the Mitsubishi i-
MiEV vehicle line, beginning with MY 2013.
Under Sec. 543.5(a), a manufacturer may petition NHTSA to grant an
exemption for one vehicle line per model year. In its petition,
Mitsubishi provided a detailed description and diagram of the identity,
design and location of the components of the antitheft device for the
i-MiEV vehicle line. Mitsubishi will install a passive, transponder-
based, electronic engine immobilizer system as standard equipment on its i-
MiEV vehicle line beginning with MY 2013. Features of the antitheft
device will include a transponder key, Electronic Time and Alarm
Control System Electronic Control Unit (ETACS ECU) and an Electric
Vehicle Electronic Control Unit (EV ECU), key ring antenna and a
passive immobilizer. Mitsubishi will also incorporate an audible and
visual alarm system as standard equipment on the entire vehicle line.
Mitsubishi's submission is considered a complete petition as required
by 49 CFR 543.7, in that it meets the general requirements contained in
543.5 and the specific content requirements of 543.6.
Mitsubishi stated that the transponder-based, electronic engine
immobilizer device prevents unauthorized starting of the engine. The
transponder is located in a traditional key that must be inserted into
the key cylinder and turned to the ``ON'' position in order to activate
the ignition. Mitsubishi also stated that activation of the immobilizer
does not require the doors to be locked. Activation of the device
automatically occurs when the ignition switch is turned to the ``OFF''
position with a valid key and deactivated when it is turned to the
``ON'' position with an invalid key. Mitsubishi further stated that the
immobilizer system checks the key code once the ignition switch is
turned to the ``ON'' position. The key ring antenna reads the specific
ignition key code for the vehicle and transmits an encrypted message
containing the key code to the ETACS ECU. The ETACS ECU determines if
the key is valid and authorizes the engine to start by sending a
separate encrypted message to the EV ECU. The engine will start only if
the key code matches the unique identification key code previously
programmed into the EV ECU. If the codes do not match, the engine will
be disabled
.

In addressing the specific content requirements of 543.6,
Mitsubishi provided information on the reliability and durability of
its proposed device. To ensure reliability and durability of the
device, Mitsubishi conducted tests based on its own specified
standards. Mitsubishi provided a detailed list of the tests conducted
and believes that the device is reliable and durable since the device
complied with its specific requirements for each test. Mitsubishi
additionally stated that its immobilizer system is further enhanced by
several factors making it very difficult to defeat. Specifically,
Mitsubishi stated that communication between the transponder and the
ECU are encrypted and that there are over 4.3 billion possible key
codes that make successful key code duplication virtually impossible.

Mitsubishi also stated that its immobilizer system and the ECU share
security data during vehicle assembly that make them a matched set.
These matched modules will not function if taken out and reinstalled
separately on other vehicles. Mitsubishi further stated that it is
impossible to mechanically override the system and start the vehicle,
because the vehicle will not be able to start without the transmission
of the specific code to the electronic control module. Lastly,
Mitsubishi stated that the antitheft device is extremely reliable and
durable because there are no moving parts, nor does the key require a
separate battery.
Mitsubishi informed the agency that the i-MiEV vehicle line was
first equipped with the proposed device beginning with its MY 2012
vehicles.
Based on the supporting evidence submitted by Mitsubishi on the
device, the agency believes that the antitheft device for the i-MiEV
vehicle line is likely to be as effective in reducing and deterring
motor vehicle theft as compliance
with the parts-marking requirements
of the Theft Prevention Standard (49 CFR part 541). The agency
concludes that the device will provide the five types of performance
listed in Sec. 543.6(a)(3): Promoting activation, attract attention to
the efforts of an unauthorized person to enter or move a vehicle by
means other than a key, preventing defeat or circumvention of the
device by unauthorized persons, preventing operation of the vehicle by
unauthorized entrants and ensuring the reliability and durability of
the device.
Pursuant to 49 U.S.C. 33106 and 49 CFR 543.7(b), the agency grants
a petition for an exemption
 
I know this wont help the person who lost theirs, but it may help the rest of us. The car manual says on page 3-5 under "Consumer Key programming": "You can program new keys to the system if you have two valid (already registered) keys and blank (not registered) immobilizer key"... It goes on to say the key must be cut for your vehicle. Then it gives the programming procedure.

My Remote key I have says this on it (you must open the black plastic on the key shell to see it):

G8D-625M-A
FCC ID: OUCG8D-625M-A
IC: 850G-G8D625MA
OMRON Corporation Japan

The key blade is a "MIT3" (be sure the key blade matches yors in any photos of the blank).

There are several on-line places including e-bay sell the key remote (G8D-625M-A):

http://www.ebay.com

I'm going to try it out and see if it works. That's assuming I can find a locksmith to do the cutting on the key.

:!: :!: :!: October 2ed, 2012 - Update: :!: :!: :!:
The key advertised on eBay did NOT work there is a tiny difference in the key blank. The locksmith cut the key for me but it wont take the programming as described in the manual. I notice the key blank (from eBay) has more blank space between the black plastic and the cut on the black. Also the locksmith said the encryption may be different on the i-MiEV than it is on other Mitsubishi models. He is going to see if he can find the right one. I won't hold my breath for that. So I ended up with an extra remote which is not programmed. The key is not good otherwise.
 
I found some more information here:
http://www.kaba-ilco.com/key-systems/media/566202/v2/File/2013-auto-truck-key-blank-reference.pdf

"i-MIEV 2012-2013 All 3001-32009 EK3P-MIT17 or RW4 Plus, Ilco EZ®-Clone Plus or Plus Box Service Key X224/MIT3 Philips Encrypted (46) System 288
EK3LB-MIT14*
MIT17A-PT(A) Service Key X224/MIT3 Philips Encrypted (46) System 288"

I was also curious about the keyless entry programming, and found in the manual that can only be programmed by the dealer, unless some one figures out how to do it otherwise. I know VW's allow that to be done if you have a valid transponder key.
 
Anyone know if this key / transmitter will work? I assume I will need to get the dealer to program it but its cheaper than $185 as previously posted...

http://www.ebay.com/itm/2012-2014-MITSUBISHI-I-MIEV-KEY-BLANK-REMOTE-FOB-TRANSMITTER-OEM-MN141010/301197134978

I only got one key with my car
 
Well, it *is* a Mitsu dealer selling them, and they do say 'send us your VIN to make sure', so I think I'd give it a try - If it doesn't work, I think eBay will help you get your money back

Don
 
Back
Top