The Key must be in ON or READY to run the scanner.
Once you get thru the select make model year, then press okay while on the Diagnose menu item.
Then Manual Select, and Read DataSteam.
The 12V aux Voltage is read in the ETACS DataStream Item List.
Welded Contactors are in the EV-ECU list.
Cell Min Max Voltages are in the BMU list.
To select items to read:
Select the ECU from the list,
Then scroll thu the list and press OK to get a whole page or scroll down to just the one you want, then press OK, use the right and left arrow to move to next page. When done selecting what you want to see, then press ESC to activate reading the data.
i think to clear a code, you use this same select and activate sequence:
Select clear code, then move down or left or right button to the one to the one you want to clear and press OK to select it, then press ESC to activate the clear command, maybe press OK to activate? i'm not 100% sure as i had no codes to clear to test it.
kiev = kenny's innovative electric vehicle