krox
Posts: 4
Joined: Mon Apr 08, 2019 6:44 am

EVSE blink 2 led

Mon Apr 08, 2019 7:10 am

When the EVSE is plugged in, 2 lights (power and fault) start flashing. Grounding is good. EVSE model: 9482A128.
What could be the reason?

kiev
Posts: 926
Joined: Sun May 03, 2015 7:15 am
Location: The Heart o' Dixie
Contact: Website

Re: EVSE blink 2 led

Tue Apr 09, 2019 6:21 am

Here is a link to a troubleshooting page for the OBC/EV,SE

http://mmc-manuals.ru/manuals/i-miev/online/Service_Manual/2012/54/html/M154950080003200ENG.HTM

Basically they indicate to check the EV,SE device/cable,
or connect MUT to read the OBC codes and run thru the steps for the code.

Blinking Fault (Red) is procedure #8 and is focused on cable and connector issue.
PROBABLE CAUSE:
The charging cable is failed.
Earth leakage of regular charging high voltage system circuits.
Short circuit to earth of pilot signal circuit.
The on board charrger is failed.


Maybe some local EV driver can let you try their EV,SE on your car, or try your EV,SE in their car, to see where the problem resides.
kiev = kenny's innovative electric vehicle

krox
Posts: 4
Joined: Mon Apr 08, 2019 6:44 am

Re: EVSE blink 2 led

Tue Apr 09, 2019 8:39 pm

Thank you.

Return to “General Technical Discussions”