Jasmin
Posts: 8
Joined: Sat Sep 19, 2015 10:58 am

Windscreen washer bottle

Sat Sep 09, 2017 10:14 am

Hi all,

A silly question resulting from a stupid moment! I had a small shunt / prang the other day, which was mostly my bad. No real damage done, and cosmetics easily repaired with a heat gun persuasion of the bumper and a bit of spray paint. *But* and this is a big but, the windscreen washer bottle appears to have been cracked, and now leaks out any screenwash over the tarmac rather than on my windscreen :(

Mine is the European model (not sure if it's different to the north american version?) and I can't figure out how to remove it so I can seal it up with some epoxy, or fit a replacement if I can find an affordable one. Has anyone worked out how to do get it out? Hoping it doesn't involve having to remove the entire front bumper assembly to do it!

phb10186
Posts: 224
Joined: Fri May 13, 2016 12:58 am
Location: North London suburbs, UK

Re: Windscreen washer bottle

Sun Sep 10, 2017 11:41 am

On the European model... looks like you would have to take out the off side front headlight cluster and the bumper I would have thought. Can't see any other way round it unless you can get to it via the front off side wheel arch by removing all the plastic lining.

There isn't a huge amount of space either.

Also, for what it's worth, if your in the UK... ive had very good results using CT1, it's like a clear all weather silicone, but it's as sticky as he'll, and flexible too... so if I was repairing a washer bottle I'd use CT1.... Google it... comes in a tube like bathroom silicone. It's extremely good stuff.
2012 I-MIEV Keiko Silver 11K
2010 Insight ES-T 43K
2001 Accord Type-V (F23 manual)
2009 Hornet CB600F
2008 SH300

Return to “General / Main Owners Forum”