Page 16 of 16

Re: hobdrive - and i-MIEV ion zero, show electronic control units, reset errors

Posted: Fri Jan 22, 2021 4:01 am
by zsandor
kdika wrote:
zsandor wrote:
kdika wrote:
Try to select ECU Type in the settings:
-Mitsubishi SRS only DTC KWP
or
-Mitsubishi SRS only DTC CAN



Hi, i downloaded the newest beta version, but do not have this options. I have following ECU types for Mitsubishi:

Mitsubishi 4M41 (Pajero)
Mitsubishi CVT+OBD2 CAN
Mitsubishi iMiEV Li-ION
Mitsubishi iMiEV Li-Titanate
Mitsubishi ?imicab iMiEV LI-ION 2014
Mitsubishi MUT
Mitsubishi Outlander PHEV+OBD

where to get that additional ECU types?




Screen/settings/version and update/version?

Screen/settings/vehicle settings/ecu settings/ECU Manufacturer (filter) - Mitsubishi
Screen/settings/vehicle settings/ecu settings/Vehicle Type ECU - Mitsubishi SRS only DTC KWP or Mitsubishi SRS only DTC CAN

PS. Reading errors will only work in the full version





I have the 1.5.48 full/licensed version. It does not install any newer (applyed for 1.6.6 beta version), even if i delete end reinstall the app...
Will try it with another device

Re: hobdrive - and i-MIEV ion zero, show electronic control units, reset errors

Posted: Fri Jan 22, 2021 11:43 am
by kdika
- v1.6.4 04/01/2020
- ECU:
Mitsubishi SRS only DTC CAN
Mitsubishi SRS only DTC KWP

android > 4.4

Last beta - v1.6.13 12/18/2020

Re: hobdrive - and i-MIEV ion zero, show electronic control units, reset errors

Posted: Fri Jan 22, 2021 12:53 pm
by zsandor
Many thanks!!!! :-)))))) i installed on another android device a never version of Hobdrive and i got than the two above mentioned ECU’s. The second one has worked and could reset the airbag warning light on my C-Zero :-) as this was caused by disconnected switch under the driver seat, and had no real failure in the system, the light was not reocurring. Will also check the cell balancing function soon :-)
Thanks!

Re: hobdrive - and i-MIEV ion zero, show electronic control units, reset errors

Posted: Sun Feb 07, 2021 11:24 am
by vh2q
Can someone remind me how to get to the traction battery diagnostics? Ie which screens to navigate? Call me dumb but i hsve done this in the past, cannot remember exactly how, i cant find those screens now even though the rest of it seems to work.

Re: hobdrive - and i-MIEV ion zero, show electronic control units, reset errors

Posted: Tue Feb 09, 2021 12:47 am
by kdika
Full version read DTC: screens/Diagnostic