Page 1 of 1

Process for programming new remote for I-MIEV

Posted: Sat Nov 29, 2014 7:55 am
by ScootJockey
Hello. I was able to find a good deal on a used remote (the one used to pre-warm the car and schedule charging) but I need to pair it to my car. I was wondering if anyone had done this themselves, or knew the procedure to do so. I have heard that it is some crazy sequence of button pushes, and that the MUT is not required? Thank you for your help.

Re: Process for programming new remote for I-MIEV

Posted: Tue May 19, 2015 7:21 pm
by ScootJockey
This must be a well kept trade secret! I ended up having my dealer program the remote for me to the tune of $50.

Re: Process for programming new remote for I-MIEV

Posted: Wed May 20, 2015 7:03 am
by Don
So . . . . did he use a 'crazy sequence of button pushes' or did he use the M.U.T. III??

Don

Re: Process for programming new remote for I-MIEV

Posted: Sun Nov 03, 2019 1:08 am
by edlv
I had a problem with registering the IMIEV Remote. For a long time I was looking for an instruction on how to do this and constantly came across this thread. Therefore, I decided to post the information found, here. Hope this helps someone.


MiEV REMOTE REGISTRATION PROCEDURES. From http://www.mitsubishitechinfo.com

Video:
YouTube video

Re: Process for programming new remote for I-MIEV

Posted: Sun Nov 03, 2019 4:35 am
by JoeS
ediv, thank you for your post. You jogged my memory, as I was remiss in not providing this in our Tech/Reference subforum so it could be easily found. The original post was by jray3 back in December 2017, http://myimiev.com/forum/viewtopic.php?f=17&t=3911#p34760, and I've now copied it into our Tech/Ref section http://myimiev.com/forum/viewtopic.php?f=19&t=4443#p39897

Re: Process for programming new remote for I-MIEV

Posted: Sun Nov 03, 2019 7:17 am
by kiev
@ joe,

Some other useful information to add with this-- the Omron manual for the remote.

Image

Re: Process for programming new remote for I-MIEV

Posted: Sun Nov 03, 2019 9:03 am
by JoeS
Hi @kiev, thanks for that. I added your input to PV1's already-existing HowTo Use the i-MiEV Remote thread. The threads in that subforum can only have one post.