Page 11 of 12

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot iOn

Posted: Fri Apr 27, 2018 12:52 pm
by ChrisEV
It looks like they are on new hardware with OVMS3.1

https://www.openvehicles.com/310gettingstarted

I just found out about this some time ago and you can't get the older version anymore so it seems I have to wait until they add i-MIEV support back in :(

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot iOn

Posted: Fri Nov 02, 2018 12:32 pm
by ChrisEV
I got my V3 hardware and got it working a few days ago. It's pretty slick.

I need to find a good place to mount the hardware and antenna.

They only added support a few months ago so there's still some bugs. It doesn't currently detect the car is charging, although I can see the SOC going up over time.

There's a lot more they could grab I imagine, I was looking through the code and what little I could find on the cars CANBus IDs. I wonder if the car sends the tire pressures....

Items like SoH of the battery could work too.

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot iOn

Posted: Fri Nov 02, 2018 12:58 pm
by jjlink
I have the version 2 hardware. Let us know when they get more features on the v3 hardware working the the I-MiEV.

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot iOn

Posted: Sun Nov 04, 2018 7:10 am
by ChrisEV
jjlink wrote:I have the version 2 hardware. Let us know when they get more features on the v3 hardware working the the I-MiEV.


I never used V2 but V3 seems easier to use given that it can update itself automatically.

I couldn't find more info on the car's CAN bus, beyond what's currently being monitored. Canion tracks much more detail but the basic categories on the battery, charging and temperatures seem to be covered.

Not even sure if it's possible or safe to write data to do things like trigger preheating etc.

edit: and the new update fixed the charging detection so I can finally monitor the car charging while out of remote range(which is almost always the case)

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot iOn

Posted: Sat Nov 24, 2018 6:02 pm
by ChrisEV
Testing out individual cell voltages and temperatures:

Image

Only available on local WiFi but can technically be available in the app. I can check them via SMS although it's not very readable.

Can also set up alerts for cell temperatures/voltage although this slammed my phone with alerts by default as there is a big gap in cell temperatures during charging.

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot iOn

Posted: Tue Dec 25, 2018 2:20 am
by KommyKT
ChrisEV wrote: Canion tracks much more detail


Which more details you missed from OVMS?
SOH set now in Trio/Settings on web interface, to calibrate ideal range.

I see you use my code. The first is charge detection. (in my city does not have a working DC charger), i think now works great. Now i want to add some feature to code.
Some data that only show metrics:
- heater temperature
- energy used/received
- charging energy used
- trip data (xmi trip), show kWh/100km, km/kWh, trip length, heating energy used

all energy calculation is first try

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot iOn

Posted: Thu Dec 27, 2018 9:18 pm
by ChrisEV
KommyKT wrote:
ChrisEV wrote: Canion tracks much more detail


Which more details you missed from OVMS?
SOH set now in Trio/Settings on web interface, to calibrate ideal range.

I see you use my code. The first is charge detection. (in my city does not have a working DC charger), i think now works great. Now i want to add some feature to code.
Some data that only show metrics:
- heater temperature
- energy used/received
- charging energy used
- trip data (xmi trip), show kWh/100km, km/kWh, trip length, heating energy used

all energy calculation is first try


Is there an update on your NAS? I can't seem to download it. I can test charge detection.

I've seen the SoH setting and the energy used by the heater which is very useful. I haven't seen any of the other metrics show any data. A trip odometer with energy calculations would be very useful as I get a daily email with a spreadsheet of all the metrics.

I'm looking at the coffee for the iOS and Android apps to see how to add this to the interface.

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot iOn

Posted: Fri Dec 28, 2018 2:02 am
by KommyKT
Yes, latest version on the NAS.
Now i see some 12V Battery Critical message while driving.
ChrisEV wrote:
KommyKT wrote:
ChrisEV wrote: Canion tracks much more detail


Which more details you missed from OVMS?
SOH set now in Trio/Settings on web interface, to calibrate ideal range.

I see you use my code. The first is charge detection. (in my city does not have a working DC charger), i think now works great. Now i want to add some feature to code.
Some data that only show metrics:
- heater temperature
- energy used/received
- charging energy used
- trip data (xmi trip), show kWh/100km, km/kWh, trip length, heating energy used

all energy calculation is first try


Is there an update on your NAS? I can't seem to download it. I can test charge detection.

I've seen the SoH setting and the energy used by the heater which is very useful. I haven't seen any of the other metrics show any data. A trip odometer with energy calculations would be very useful as I get a daily email with a spreadsheet of all the metrics.

I'm looking at the coffee for the iOS and Android apps to see how to add this to the interface.

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot iOn

Posted: Fri Dec 28, 2018 7:16 pm
by ChrisEV
I downloaded the new firmware. I'll give it a try.

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot iOn

Posted: Sun Dec 30, 2018 12:08 pm
by jjlink
I just ordered the v3.1 OVMS hardware, so in the near future I can test as well.