OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot iOn

[jjlink]

I just got my v3.1 OVMS hardware, up and running today.

In case anyone is interested a OVMS v2 hardware box is for sale on eBay for $30.00 (good deal).
https://www.ebay.com/itm/OVMS-Open-Vehi ... 3606077227

I may also try sell my v2 box as well if anyone is interested.

[ChrisEV]

I just got my v3.1 OVMS hardware, up and running today.

How's it working for you?

Right now it's pretty good for me. I'm getting some nice trip and battery statistics out of it.

I need a better place to mount the hardware and antenna

[jjlink]

I just got my v3.1 OVMS hardware, up and running today.

How's it working for you?

Right now it's pretty good for me. I'm getting some nice trip and battery statistics out of it.

I need a better place to mount the hardware and antenna

____________________________________________________________________________________________________________________________________________

I mounted it down under where the 12v outlet is. Basically all I have done is got the Android app connected to my OVMS v3 car module working. It appears the estimated range is wrong, and the ideal range shows zero all the time.

Other than the Android app, I have not tried much. It looks like the commands are different. I did checkout the dashboard and the web interface for setup. Are there other things I should try out?

[ChrisEV]

KommyKT has a custom build of OVMS that supports more features than the "official" version.

I've been posting some results here:

https://github.com/openvehicles/Open-Ve ... issues/174

The link to download it is in there.

It seems to work pretty well and fixes any problems I've found so far. It's even got a visual of all cells in the web interface.

I've been trying to do a CANbus capture but it just crashes my module everytime, as I was hoping to report on when the car is preheating etc.

[jjlink]

KommyKT has a custom build of OVMS that supports more features than the "official" version.

I've been posting some results here:

https://github.com/openvehicles/Open-Ve ... issues/174

The link to download it is in there.

It seems to work pretty well and fixes any problems I've found so far. It's even got a visual of all cells in the web interface.

I've been trying to do a CANbus capture but it just crashes my module everytime, as I was hoping to report on when the car is preheating etc.

_____________________________________________________________________________________________________________________________________________

I got the firmware loaded and ran it around the block.

The BMS monitor is pretty cool. I will check it again after charging.

https://1drv.ms/u/s!APeLRIUxoBzYn4dm

Thanks

[ChrisEV]

V3.2 is out and it has the new iMIEV code.

It seems to work well. I have more problems with non iMIEV specific stuff like wifi disconnect and some crashes.

It seems to support everything that's ever been discovered on the CANbus for the car from what I can tell. I don't know if the car sends the psi of each tire on the bus for example.

I wanted it to monitor charging remotely and it works great for that. Having an automatic trip calculation is nice as well.

Now we just need to snoop more data on the bus.

Amazing job KommyKT