Ok, the rectangles reflected the acceleration and regen activity on a short trip (30 miles) I took this evening with the heat on. However, in checking the 'Description' write-up on the rectangles, there was no explanation. I do suggest that the developers add that to their package.
However, I could not for the life of me figure out how to set up the screens with different stats. Just how does one do this? (This should be added to the 'Description' also.)
OK, so the procedure to set up the two trip timers is described in the 'Description', I just missed it!
Still don't know how to delete a trip from the pull-down on the upper right of the screen. Any thoughts on this?
Also, after the trips were over, I reviewed the output of several trips. I turned Bluetooth off and went inside. Unfortunately, Canion kept sending messages and re-enabling Bluetooth, which I found rather irritating. Finally, I just pulled the OBDLink from the car. This allowed me to review the data in peace. So the question is how does one turn the messaging off? Or prevent Canion from re-enabling Bluetooth?