JoeS
Site Moderator
Posts: 3215
Joined: Thu Dec 15, 2011 5:47 am
Location: Los Altos Hills, California

Re: Duosida EVSE

Sat May 13, 2017 11:32 am

Let's summarize -

We know that the i-MiEV draws around 13A on 240vac. That is not the topic for this discussion, as there is no problem feeding the i-MiEV with the Duosida off either a 20A or 30A circuit at 240vac.

The question on the table is 120vac current draw by the i-MiEV. justoneman, looks like you have everything under control. Until we know more details, the Duosida (as far as we know it's programmed to 16A) should be used on a 120vac 20A circuit.

This may all go away as an issue if someone actually measures the i-MiEV current draw from an 'unrestrained' EVSE on 120vac and finds it to be around 12A. If that is the case, justoneman, you won't even need to do anything, but if it's easy to pull that wire and upgrade the circuit to 20A I'd do it anyway.

thomash85715, this whole discussion started because you said you couldn't use 240vac. Now you went off and bought the Duosida and will be using it on your dryer outlet which is 240vac.

In effect, it was good to have this discussion because it drew attention to the possible 120vac problem with the Duosida.
EVs: 2 Wht/Blu SE Prem., '13 Tesla MS85, 3 156v CorbinSparrows (2 Li-ion), 24v EcoScoot(LiFePO4)
EV Conv: 156v '86 Ram PU, 144v '65 Saab 96
Hybrids: 48v1kW bike
ICE: '88 Isuzu Trooper. Mothballed: '67 Saab (orig.owner), '76 MBZ L206D RHD RV

justoneman
Posts: 76
Joined: Sun Apr 09, 2017 6:09 pm

Re: Duosida EVSE

Sat May 13, 2017 4:03 pm

The only thing Joe, is it can't really be drawing only 12A though right? Not at the rate my car is charging.



JoeS wrote:Let's summarize -

We know that the i-MiEV draws around 13A on 240vac. That is not the topic for this discussion, as there is no problem feeding the i-MiEV with the Duosida off either a 20A or 30A circuit at 240vac.

The question on the table is 120vac current draw by the i-MiEV. justoneman, looks like you have everything under control. Until we know more details, the Duosida (as far as we know it's programmed to 16A) should be used on a 120vac 20A circuit.

This may all go away as an issue if someone actually measures the i-MiEV current draw from an 'unrestrained' EVSE on 120vac and finds it to be around 12A. If that is the case, justoneman, you won't even need to do anything, but if it's easy to pull that wire and upgrade the circuit to 20A I'd do it anyway.

thomash85715, this whole discussion started because you said you couldn't use 240vac. Now you went off and bought the Duosida and will be using it on your dryer outlet which is 240vac.

In effect, it was good to have this discussion because it drew attention to the possible 120vac problem with the Duosida.

justoneman
Posts: 76
Joined: Sun Apr 09, 2017 6:09 pm

Re: Duosida EVSE

Sat May 13, 2017 5:27 pm

justoneman wrote:The only thing Joe, is it can't really be drawing only 12A though right? Not at the rate my car is charging.



JoeS wrote:Let's summarize -

We know that the i-MiEV draws around 13A on 240vac. That is not the topic for this discussion, as there is no problem feeding the i-MiEV with the Duosida off either a 20A or 30A circuit at 240vac.

The question on the table is 120vac current draw by the i-MiEV. justoneman, looks like you have everything under control. Until we know more details, the Duosida (as far as we know it's programmed to 16A) should be used on a 120vac 20A circuit.

This may all go away as an issue if someone actually measures the i-MiEV current draw from an 'unrestrained' EVSE on 120vac and finds it to be around 12A.] If that is the case, justoneman, you won't even need to do anything, but if it's easy to pull that wire and upgrade the circuit to 20A I'd do it anyway.

thomash85715, this whole discussion started because you said you couldn't use 240vac. Now you went off and bought the Duosida and will be using it on your dryer outlet which is 240vac.

In effect, it was good to have this discussion because it drew attention to the possible 120vac problem with the Duosida.


I have been studying my 15A circuit situation today and realize there is more on the circuit than just the one outlet. I would need to pull a whole lot of wire to make the entire circuit comply with a new 20A breaker. Now I am thinking I need to run a totally new line.

JoeS
Site Moderator
Posts: 3215
Joined: Thu Dec 15, 2011 5:47 am
Location: Los Altos Hills, California

Re: Duosida EVSE

Sat May 13, 2017 8:58 pm

justoneman wrote:The only thing Joe, is it can't really be drawing only 12A though right? Not at the rate my car is charging.
Right - the question is how much over 12A?
justoneman wrote:I have been studying my 15A circuit situation today and realize there is more on the circuit than just the one outlet. I would need to pull a whole lot of wire to make the entire circuit comply with a new 20A breaker. Now I am thinking I need to run a totally new line.
Ouch! When the i-MiEV first came out, IIRC Mitsubishi insisted that we provide a dedicate line for the car and were having Best Buy Geek Squad come out to 'inspect' our installation for compliance. They did that with me, but their follow-up fizzled out as I wasn't buying into what they were trying to sell me.

Turns out we've been re-inventing the wheel, with the Leaf forum already well into this Duosida topic.
http://www.mynissanleaf.com/viewtopic.php?f=26&t=22692&p=494099
Evidently there's a Duosida model out there that is current programmable by simply shaking it!

Indications are that there are a number of cars and EVSEs not following the J1772 standard when it comes to 120vac (upper limit of 16A, but some go way over that which holds them in good stead using a TT-30 RV campground outlet).

When the standards were being set, Tesla thankfully prevailed on L2, as I've charged mine using a J1772 plug at 60A on 240vac, and have a 40A eMW JuiceBox J1772 capability at home if I ever want to use it.
EVs: 2 Wht/Blu SE Prem., '13 Tesla MS85, 3 156v CorbinSparrows (2 Li-ion), 24v EcoScoot(LiFePO4)
EV Conv: 156v '86 Ram PU, 144v '65 Saab 96
Hybrids: 48v1kW bike
ICE: '88 Isuzu Trooper. Mothballed: '67 Saab (orig.owner), '76 MBZ L206D RHD RV

thomash85715
Posts: 33
Joined: Sat Apr 01, 2017 9:05 am
Contact: Website Facebook

Re: Duosida EVSE

Sat May 13, 2017 10:26 pm

To say my position on this "evolved" would put me in league with lots of politicians who "see the light" and switch sides. I hope that is not a bad thing to be criticized for. It is true that I burned up the server traffic with my machinations about current draw on L1 and then turned around and bought a duosida with a 240V dryer plug on it. I grew weary of being cajoled (or whatever this was) over clinging to L1 and succumbed to the drumbeat which should be OK.
Today the thing came from a guy in Gilbert AZ 100 miles from me and I hooked it up and my car sucked up big power big time. My clamp meter showed around 14.5A on each leg soon after connecting for first time. Within the first hour I had gained three bars and maybe 15 miles of range. Will double check pictures I took and post them tomorrow.
The shakeable duosidas cost more like $400 I was told by guy who sold me this one.
Soon I might try to hook this up as L1 on a 120V plug but need to know first if it makes any difference which of the two 240 wires gets the hot and which the neutral.
In an insane society a sane man would appear insane.
Acquired 2012 silver ES April 2017.

wmcbrine
Posts: 302
Joined: Wed Apr 29, 2015 10:26 am
Location: Laurel, MD
Contact: Website

Re: Duosida EVSE

Sun May 14, 2017 2:15 am

JoeS wrote:When the standards were being set, Tesla thankfully prevailed on L2, as I've charged mine using a J1772 plug at 60A on 240vac,

Where do you find those in the wild, though? I mean, apart from Tesla-supplied equipment. And are there yet any non-Tesla cars that can charge at more than 40A AC? It seems almost like a theoretical part of the standard more than an actual one.

JoeS
Site Moderator
Posts: 3215
Joined: Thu Dec 15, 2011 5:47 am
Location: Los Altos Hills, California

Re: Duosida EVSE

Sun May 14, 2017 4:06 am

thomash85715 wrote:To say my position on this "evolved" would put me in league with lots of politicians who "see the light" and switch sides. I hope that is not a bad thing to be criticized for...
Today the thing came from a guy in Gilbert AZ 100 miles from me and I hooked it up and my car sucked up big power big time. My clamp meter showed around 14.5A on each leg soon after connecting for first time. Within the first hour I had gained three bars and maybe 15 miles of range...
thomash85715, delighted you saw the light and are now enjoying the maximum power that the i-MiEV charger can absorb, although the 14.5A reading is a bit high if your voltage is 240vac. Perhaps the actual voltage is lower? In any case, my comment wasn't intended as criticism and I apologize if it came out that way.

Sorry for wandering a bit off-topic on the J1772 specifications. Probably the more memorable high-power J1772 EVSE I found was in Iraan, TX, which is a 75A Clipper Creek unit. https://api.plugshare.com/view/location/19815
Installed and maintained by an accommodating Tesla owner who wanted to be able to service both conventional EVs as well as Teslas with one unit. A year ago Tesla had still not built out their Supercharger network in that part of the world and there was nuthin' else out there.
My Tesia has a dual charger setup that is good for 240vac 80A. Haven't heard of any stock BEVs with higher than 7.2kW built-in chargers.
There is a downside to installing a higher-power EVSE: the heavy power J1772 cable is somewhat more unwieldly than the relatively-lightweight Mitsu EVSE cable, adding perhaps a couple of seconds to this twice-daily operation. :roll:
EVs: 2 Wht/Blu SE Prem., '13 Tesla MS85, 3 156v CorbinSparrows (2 Li-ion), 24v EcoScoot(LiFePO4)
EV Conv: 156v '86 Ram PU, 144v '65 Saab 96
Hybrids: 48v1kW bike
ICE: '88 Isuzu Trooper. Mothballed: '67 Saab (orig.owner), '76 MBZ L206D RHD RV

justoneman
Posts: 76
Joined: Sun Apr 09, 2017 6:09 pm

Re: Duosida EVSE

Sun May 14, 2017 6:53 am

JoeS wrote:
justoneman wrote:The only thing Joe, is it can't really be drawing only 12A though right? Not at the rate my car is charging.
Right - the question is how much over 12A?
justoneman wrote:I have been studying my 15A circuit situation today and realize there is more on the circuit than just the one outlet. I would need to pull a whole lot of wire to make the entire circuit comply with a new 20A breaker. Now I am thinking I need to run a totally new line.
Ouch! When the i-MiEV first came out, IIRC Mitsubishi insisted that we provide a dedicate line for the car and were having Best Buy Geek Squad come out to 'inspect' our installation for compliance. They did that with me, but their follow-up fizzled out as I wasn't buying into what they were trying to sell me.

Turns out we've been re-inventing the wheel, with the Leaf forum already well into this Duosida topic.
http://www.mynissanleaf.com/viewtopic.php?f=26&t=22692&p=494099
Evidently there's a Duosida model out there that is current programmable by simply shaking it!

Indications are that there are a number of cars and EVSEs not following the J1772 standard when it comes to 120vac (upper limit of 16A, but some go way over that which holds them in good stead using a TT-30 RV campground outlet).

When the standards were being set, Tesla thankfully prevailed on L2, as I've charged mine using a J1772 plug at 60A on 240vac, and have a 40A eMW JuiceBox J1772 capability at home if I ever want to use it.


Yes there is that unit with the built in gauge that indicates the amps and is changed via shaking. It has a whole series of levels that it can be adjusted to. What is confusing me is my unit is rated with three levels of amperage at 120v 10A or 13A or 16A. How on earth on my unit is the amperage switched? I had read somewhere that it automatically adjusted to what the circuit made available. if that is the case is not 13A the only possibility? It certainly cannot be 16A on my 15A circuit right?

Don
Site Moderator
Posts: 2452
Joined: Thu May 10, 2012 3:55 pm
Location: Biloxi MS

Re: Duosida EVSE

Sun May 14, 2017 10:05 am

How would you switch it between 10 amps and 13? It can't 'automatically' tell what your circuit is capable of, so there much be some way to manually switch it

Yes, it could very well be permanently set to 16 and designed for use only with a 20 amp 120 volt outlet. Luckily, your iMiEV can't draw 16 amps on L1, so you *might be* safe with your 15 amp outlet . . . . but I would monitor the current the first time you use it to make sure it's not overloading the circuit. You don't want to exceed 80% of the 15 amps your outlet is rated for, which would be 12 amps. I *think* your car would probably draw 13 to 13.5 amps, and if that's the case, I would install a proper outlet if you can't regulated it down to 12 amps or less

Don
2012 iMiEV SE Premium, White
2012 iMiEV SE, White
2014 Ford Transit Connect XLT SWB wagon, 14,000 miles
1994 Miata 60K miles - Soon to be sold
1979 Honda CBX six into six

misterbleepy
Posts: 184
Joined: Thu Apr 11, 2013 12:53 am
Location: Newquay, Cornwall, UK
Contact: WLM AOL

Re: Duosida EVSE

Mon May 15, 2017 2:09 am

JoeS wrote:Haven't heard of any stock BEVs with higher than 7.2kW built-in chargers.

I think the Renault Zoe (small european hatchback BEV) can charge at 22kW and 43kW AC as well as 3kW and 7kW - it's available with a 22kWh or 41kWh battery. I think it might require a 3 phase AC supply to charge at the 2 highest rates.
Keith B.
driving with the power of 15.667 kettles

Return to “EVSE (Charging Stations)”