9h1bw
Posts: 26
Joined: Sun Mar 19, 2017 2:35 am

Re: Using the battery as an emergency supply

Mon Aug 28, 2017 1:28 am

Kiev,
Thank you once again for the valuable information.

I am not sure what you mean by direct vs ready more.

I am sourcing a chademo plug at the moment to see if i get all the components first.

If I have any results i will post again.

kiev
Posts: 592
Joined: Sun May 03, 2015 7:15 am
Location: The Heart o' Dixie
Contact: Website

Re: Using the battery as an emergency supply

Mon Aug 28, 2017 6:24 am

9h1bw wrote:...
I am not sure what you mean by direct vs ready more.


Connecting directly to the pack voltage at the chademo terminals
vs
connecting to the terminals inside the Motor Control Unit while ON in READY mode. When the car is ON there is additional overhead loads.

Good luck with finding a low-cost chademo connector--i would just look for some 9mm diameter connector pins or have a machine shop make some of brass or copper.
kiev = kenny's innovative electric vehicle

9h1bw
Posts: 26
Joined: Sun Mar 19, 2017 2:35 am

Re: Using the battery as an emergency supply

Mon Aug 28, 2017 6:47 am

Thank you that us most helpful. So all i need is two 9mm pins to the chademo + and - socket? Lovely.

Return to “Batteries and Battery Management”