Posts: 39
Joined: Mon May 15, 2017 2:49 pm
Location: Scotch Plains, NJ

Re: Need EV BatMon Help in North Central New Jersey

Sun Feb 25, 2018 9:28 am

Well posters,

My iMiEV is now at a dealer, not for the afformentioned issue; but an entirely new one. Today my gearbox seized in the rain on a very busy commercial highway just before a junction; to illustrate the conditions. We'll see what the prognosis is, the differential was steaming/smoking when I got out to look.

I have heard in the last week or two a whine, but attributed that to when New Jersey actaully paves roads, they are very smooth. Very suddenly in the middle of a 15 mile trip, the whine got progressively louder. Then came the turtle. Once the car stopped, power was applied, but no axle rotation came. I am on a train to work luckily, I'll find out the damage tomorrow; Monday Feb 25th.
"The Black Pearl" 2012 Mitsubishi iMiev, 39,8XXmi

I'm offended by offened people.

Site Moderator
Posts: 3385
Joined: Thu Dec 15, 2011 5:47 am
Location: Los Altos Hills, California

Seized Gearbox

Sun Feb 25, 2018 10:11 am

Mievo, I created a new thread and moved your post over here. I believe this is the first time we have heard of a gearbox problem with the i-MiEV. Lost oil?

Sad to say, I'm very pessimistic about the cost to repair...

Curious as to why turtle came on, as that should be unrelated. How many bars on your fuel gauge and what was your RR?
EVs: 2 Wht/Blu SE Prem., '13 Tesla MS85, 3 156v CorbinSparrows (2 Li-ion), 24v EcoScoot(LiFePO4)
EV Conv: 156v '86 Ram PU, 144v '65 Saab 96
Hybrids: 48v1kW bike
ICE: '88 Isuzu Trooper. Mothballed: '67 Saab (orig.owner), '76 MBZ L206D RHD RV

Posts: 1154
Joined: Thu Jan 15, 2015 7:25 pm
Location: Phoenix

Re: Seized Gearbox

Sun Feb 25, 2018 11:03 am

JoeS wrote:Sad to say, I'm very pessimistic about the cost to repair...

As suggested in the AC compressor problem from another thread, just wondered if the part could be preserved with the notion of investigating its capacity to be remanufactured, or replaced with another car's diff?

See, e.g., https://www.jasperengines.com

But there are others out there also doing remanufactured parts. If the part can be preserved, then I suggest that we explore the remanufacturing options, which would in the long run, benefit all of us.
2012 iMIEV ES
2014 Chevy Volt

Site Moderator
Posts: 2582
Joined: Thu May 10, 2012 3:55 pm
Location: Biloxi MS

Re: Seized Gearbox

Sun Feb 25, 2018 12:26 pm

Phximiev wrote:But there are others out there also doing remanufactured parts. If the part can be preserved, then I suggest that we explore the remanufacturing options, which would in the long run, benefit all of us.
I suspect we're going to find that a bad seal caused the gearbox to gradually lose all it's oil and that caused the seizure - A very unusual and rare failure. Not very likely anyone is going to want to set up a remanufacturing option for a rare part of a very limited production car - This is the opposite end of the spectrum from say, remanufacturing Delco Alternators :lol:

I'm guessing Mievo's car is probably not parked in a garage?? If it was, a small puddle of oil under the rear of the car would probably have given him some warning something was amiss

2012 iMiEV SE Premium, White
2012 iMiEV SE, White
2017 Chevy Volt Premier
2014 Ford Transit Connect XLT SWB wagon, 14,000 miles
1979 Honda CBX six into six

Posts: 374
Joined: Wed Jan 28, 2015 1:52 pm

Re: Seized Gearbox

Sun Feb 25, 2018 6:37 pm

Interesting and tragic!

I'm guessing turtle came on because the drive was going through power like crazy just to keep it rolling. All that heat making steam and smoke was converted traction battery power.

If it is a lubrication issue, it wouldn't leave much of a mess parked on dirt or gravel. Only 0.76 Quart to fill the unit!

2014 cool silver ES, acquired new 4/2015
2014 Labrador Black Pearl ES, acquired new 3/2016

Posts: 359
Joined: Fri Jun 14, 2013 5:54 pm

Re: Seized Gearbox

Mon Feb 26, 2018 1:35 pm

I was just at my old I-MiEV dealer and talked to the owner about the I-MiEV I sold him for parts. He says he still has the gearbox assmebly. I don't know what he wants for it but it only had 600 miles on it when the car was in a wreck. If you look at some of my old posts, you will see some pictures of the gearbox when I opened it up to look inside.

The dealer is R.C. Hill Mitsubishi in DeLand Florida. Their parts department should have a list of what parts they have and could give you a decent price on it vs. overhauling yours or finding a donor car. Good luck with your car.

Posts: 1441
Joined: Tue Dec 06, 2011 1:05 am
Location: Tacoma area, WA
Contact: Website

Re: Seized Gearbox

Mon Feb 26, 2018 5:01 pm

Wow indeed. At least it's a pretty straightforward swap to replace. I'd be inclined to go with an entire drive assembly (motor, gearbox and inverter) from a lower mileage wreck. Then you can sell that motor and inverter to someone who wants an ac-powered conversion!
2012 i-SE "MR BEAN" 84,000 miles, 37 Ah
2012 i-ES traded at 21,648 miles
1983 Grumman Kurbwatt,170 kW, 32 kWh
1983 Mazda RX-7 EV 43 kW 10 kWh
1971 "Karmann Eclectric" EV 240 kW 19 kWh
1965 Karmann Ghia Cabriolet

Posts: 566
Joined: Sun May 03, 2015 7:15 am
Location: The Heart o' Dixie
Contact: Website

Re: Seized Gearbox

Wed Feb 28, 2018 3:36 am

i've repaired a few manual trans over the years and the miev would be easy. Usually the axial shaft load from the helical-cut gears wears out the bearings over time and a lack of lube would accelerate that process. Radial bearings not really intended to carry much axial load.

kiev = kenny's innovative electric vehicle

Posts: 5
Joined: Tue Mar 20, 2018 9:04 am
Location: Norway

Re: Seized Gearbox

Tue Mar 20, 2018 9:22 am

I've recently bought a 2012 i-miev with 48,000 km on the clock. I bought the car without seeing it as a bit of a gamble as the price was (too) good. I've been pleased overall, apart that is from an ominous leak from the gearbox where the driveshaft to the left wheel emerges. I've added about 450ml of fancy Mitsubishi oil to at least hopefully avoid it running dry while I consider my options. Has anyone changed this seal to know how straightforward it is and which parts are needed?

Return to “General Technical Discussions”