Go to advanced search

by Easycarex
Sat Apr 01, 2017 8:26 am
Forum: General Technical Discussions
Topic: Cheap Chinese MUT3 unable to download database
Replies: 1
Views: 1120

Re: Cheap Chinese MUT3 unable to download database

Getting Meter disconnected reading the can of the crashed Ion which won't take a charge or come to ready.
by Easycarex
Sat Apr 01, 2017 8:17 am
Forum: General Technical Discussions
Topic: Cheap Chinese MUT3 unable to download database
Replies: 1
Views: 1120

Cheap Chinese MUT3 unable to download database

Any help getting the MUT working would be very welcome.
Running on a laptop windows xp, and vista, crashes when trying to read high voltage codes, reads canbus OK
by Easycarex
Thu Oct 13, 2016 9:34 am
Forum: General Technical Discussions
Topic: Service, Diagnostic Troubleshooting and Repair, MUT 3
Replies: 24
Views: 11501

MUT 3 diagnostic tool

Looking to buy a MUT 3 diagnostic tool capable of clearing error codes for my imiev, C zero & Peugeot Ion. Don't want to spend any more than I have to. Any advice from members welcome.
Have got an old laptop and Windows XP.
Am breaking the ion for spares if anybody needs any parts.
by Easycarex
Sun Oct 09, 2016 11:57 am
Forum: General Technical Discussions
Topic: MCU using second hand bits
Replies: 5
Views: 2102

Re: MCU using second hand bits

Thanks for the link will get it touch with him
by Easycarex
Sun Oct 09, 2016 8:38 am
Forum: General Technical Discussions
Topic: MCU using second hand bits
Replies: 5
Views: 2102

Re: MCU using second hand bits

Have bought a crashed Peugeot Ion to try its MCU with the Citroens can bus circuit board in, so far had no joy with getting ready ping. Badly need a MUT 111.
Would like to transfer the battery pack and motor into a Polaris ranger EV, will need a driver for the IGBTs so could dispense with the ECU.
by Easycarex
Mon Aug 15, 2016 9:56 am
Forum: General Technical Discussions
Topic: MCU using second hand bits
Replies: 5
Views: 2102

Re: MCU using second hand bits

Thanks for the help, we tried to change the MCU codes to match the Citroen's but came to the conclusion they were flashed on.
Good to have knowledge of another MCU available.
by Easycarex
Sun Aug 14, 2016 4:31 am
Forum: General Technical Discussions
Topic: MCU using second hand bits
Replies: 5
Views: 2102

MCU using second hand bits

Anybody know if you can get round the code mismatch by swapping the main circuit board in the Motor Control Unit when fitting a MCU from another car. Would you have to use the same 3 circuit boards above the IGBTs too? Told by Mitsubishi engineers in Japan that the Citroen C Zero MCU is stopping the...
by Easycarex
Tue Aug 02, 2016 1:58 pm
Forum: General Technical Discussions
Topic: Reviving Non-Op UK Auction Sibling
Replies: 55
Views: 14939

Re: Reviving Non-Op UK Auction Sibling

How many components would have to be swapped to avoid the "code mismatch" coming up
Obviously the ECU, maybe the charger, probably the battery pack?
by Easycarex
Mon Aug 01, 2016 11:29 am
Forum: General Technical Discussions
Topic: Reviving Non-Op UK Auction Sibling
Replies: 55
Views: 14939

Re: Reviving Non-Op UK Auction Sibling

Both cars made a year before the recall. Richard tried the imiev MCU in the Citroen C0, but it would not allow him to match it with the ECU code. Tried changing both but no joy. Was only getting a code mismatch error message, don't know if that means the P1A15 high voltage fault has gone. So not fur...
by Easycarex
Mon Jul 11, 2016 7:26 am
Forum: General Technical Discussions
Topic: Reviving Non-Op UK Auction Sibling
Replies: 55
Views: 14939

Re: Reviving Non-Op UK Auction Sibling

Going to check the VIN number, only 20 Citroens affected but manufacturing date fits.
Thanks for the help.

Go to advanced search