Go to advanced search

by nuggetgalore
Fri Dec 04, 2020 1:57 pm
Forum: Batteries and Battery Management
Topic: Future Battery Replacement - A Better Battery?
Replies: 95
Views: 62263

Re: A Better Battery??

It is being worked on in Australia: https://forums.aeva.asn.au/viewtopic.php?f=49&t=5515&sid=c2ecc5e5e314ba90f1e385aa6da8c164&start=400 https://forums.aeva.asn.au/viewtopic.php?f=49&t=5515&p=82776#p82776 Hi all, the trials and tribulations of the 60 Ah cell replacement are conti...
by nuggetgalore
Fri Sep 25, 2020 2:52 pm
Forum: EVSE (Charging Stations)
Topic: 12 kW chademo charging
Replies: 42
Views: 28799

Re: Burning Leaves

The DCQC relay bypass trick was only intended to allow access to the HV of a stationary pack, such as for an emergency backup power supply for home, or for diy DC charging without using the CHAdeMO protocol. Normally the car won't go to READY with the DCQC contactors energized, but i think maybe a ...
by nuggetgalore
Thu Sep 24, 2020 7:00 pm
Forum: EVSE (Charging Stations)
Topic: 12 kW chademo charging
Replies: 42
Views: 28799

Re: 12 kW chademo charging

... Re the P1A14 , so what would happen if I connected the QC relay with jumpers and added a switched 12 V into pos 1. Obviously without the 12 V into pos 1 the car would see nothing different until pin 10 is to ground in the chademo port. But would there be a problem when the QC contactors close b...
by nuggetgalore
Thu Sep 24, 2020 7:12 am
Forum: EVSE (Charging Stations)
Topic: 12 kW chademo charging
Replies: 42
Views: 28799

Re: 12 kW chademo charging

I posted earlier that my iCarsoft i909 did read error code P1A14 but does not reset. I have questions to any of you owning one of these scanners: 1) Are you able to reset any DTCs? Yes i have been able to reset some DTCs but not necessarily all. 2) did you successfully read the balance drive status...
by nuggetgalore
Thu Sep 24, 2020 5:57 am
Forum: EVSE (Charging Stations)
Topic: 12 kW chademo charging
Replies: 42
Views: 28799

Re: 12 kW chademo charging

I posted earlier that my iCarsoft i909 did read error code P1A14 but does not reset. I have questions to any of you owning one of these scanners: 1) Are you able to reset any DTCs? 2) did you successfully read the balance drive status down to the last cell in the pack (CMU 12 cell D). respectively p...
by nuggetgalore
Mon Sep 21, 2020 9:42 pm
Forum: EVSE (Charging Stations)
Topic: 12 kW chademo charging
Replies: 42
Views: 28799

Re: 12 kW chademo charging

:D It looks like the exact same relay as mine, and the connector layout is the same other than the white wire has been replaced by an Orange one in position 2. You showed positions 1 and 3 reversed in your notes earlier, but position 1 is the blue wire and 3 is the green, and 4 is violet. Yes I got ...
by nuggetgalore
Sun Sep 20, 2020 1:38 am
Forum: EVSE (Charging Stations)
Topic: 12 kW chademo charging
Replies: 42
Views: 28799

Re: 12 kW chademo charging

it almost sounds like you have found a different relay; how does your layout compare with the picture of the ECU with the relay. What year is your car? LH or RH drive? 2010 RH drive (Australia) [edit] i checked the circuit diagrams for 2011-2013 and they were all identical to the wiring colors and ...
by nuggetgalore
Fri Sep 18, 2020 6:52 am
Forum: EVSE (Charging Stations)
Topic: 12 kW chademo charging
Replies: 42
Views: 28799

Re: 12 kW chademo charging

[quote="kiev"]Howdy Ben, i posted some info about that in the solar charging thread: connect jumper between position 2 and 1 at relay connector, and jumper pin 3 and 10 at the chademo port to cause pack relays to close and reveal pack voltage at chademo port, positive voltage is on the rig...
by nuggetgalore
Wed Sep 16, 2020 9:34 pm
Forum: EVSE (Charging Stations)
Topic: 12 kW chademo charging
Replies: 42
Views: 28799

Re: 12 kW chademo charging

[quote="kiev"]Howdy Ben, i posted some info about that in the solar charging thread: connect jumper between position 2 and 1 at relay connector, and jumper pin 3 and 10 at the chademo port to cause pack relays to close and reveal pack voltage at chademo port, positive voltage is on the rig...
by nuggetgalore
Mon Sep 14, 2020 3:16 am
Forum: Batteries and Battery Management
Topic: Cost to replace an i-miev battery?
Replies: 49
Views: 40054

Re: Cost to replace an i-miev battery?

Enginerd, glad to see that you're moving forward. I read that the project in Perth is having trouble in that the pack works and the car drives beautifully, but the additional capacity is not recognized because the car won't go past a 49 Ah discharge, regardless of cell voltages. That's interesting,...

Go to advanced search